| PMSE | Tuesday, 12 September 2006 | ||
6:00 PM-8:00 PM Moscone Center -- Hall D, Poster | |||
Joint PMSE/POLY Poster Session | |||
| Organizer, Presiding: | Dean C. Webster | ||
| Electroactive and Photoresponsive Metal-Containing Polymers | |||
| 235 | Paper Withdrawn | ||
| 236 | Use of ruthenium-containing polymer/CdS nanoparticle composites for fabrication of photovoltaic devices Kai Wing Cheng, Chui Wan Tse, Ka Yan Kitty Man, Wai Kin Chan | ||
| 237 | Hyperbranched polymer as surface modifier for nanosized zinc oxide tetrapods Chui Wan Tse, Wai Kin Chan, Aleksandra B. Djurisic | ||
| Nanotechnology Applications in Coatings | |||
| 238 | Influence of solvent in clay intercalation with block copolymers in polymeric nanocomposite formation Nihan Nugay, Sinan Sen, Turgut Nugay | ||
| Polymers for Biomedical Applications | |||
| 239 | Absorbable polymers from functionalized amino acids Rao S. Bezwada | ||
| 240 | Absorbable polymers from functionalized terephthalic acid Rao S. Bezwada | ||
| 241 | Absorbable stent coatings from functionalized drugs to prevent restenosis and late thrombosis Rao S. Bezwada | ||
| 242 | Evaluation of a bioabsorbable polyester blend for use in medical devices: CraniosorbTM, a novel cranial fixation system Kevin Cooper, Yufu Li, Bruce Lowenhaupt, David Overaker, Tom Poandl, Susan Trenka-Benthin, Jenny Yuan, Mark Zimmerman | ||
| 243 | Modification of poly (ethylene oxide)-poly (propylene oxide)-poly (ethylene oxide) with RGD peptide Sen Xu, Chengji Wang, Xiaohua Gu, Yourong Duan | ||
| 244 | Polysaccharide nano gel encapsulating DNA/polycation complexes for gene delivery Yoichi Takeda, Naohiko Shimada, Kenji Kaneko, Seiji Shinkai, Kazuo Sakurai | ||
| 245 | Ruthenium tris(bipyridine)-centered PEI for gene delivery Gina L. Fiore, James M. Edwards, Jessica L. Klinkenberg, James N. Demas, Daniel G. Gioeli, Cassandra L. Fraser | ||
| 246 | Synthesis of dendritic star block copolymers via ATRP for use as transdermal drug delivery agents Dawanne M. Eugene, Scott Michael Grayson | ||
| 247 | Synthesis and functionalization of cyclic poly(hydroxystyrene) derivatives Boyd A. Laurent, Scott Michael Grayson | ||
| 248 | Poly(L-lactide-co-ε-caprolactone) by ring opening polymerization in supercritical carbon dioxide Burcu Saner, Nalan Bilgin, Aysegul Namuslu, Erhan Piskin, Yusuf Menceloglu | ||
| 249 | Synthesis and pH sensitivity of 6-caboxymethyl chitin-based microsphere Zheng Hua, He Fei | ||
| Science and Technology of Next Generation Photovoltaics | |||
| 250 | Macroporous thin films via swollen polymer matrices Xiaojuan Fan, Claudia H. Swanson, David L. Rogow, Scott R. J. Oliver | ||
| 251 | Polymer photovoltaic cells and the challenges Yang Yang, Gang Li, Vishal Shrotriya, Yan Yao | ||
| 252 | Effect of growth rate on exciton generation and charge transport in polymer/fullerene bulk heterojunctions Vishal Shrotriya, Yan Yao, Gang Li, Yang Yang | ||
| 253 | Phenyl cored thiophene dendrimers: Synthesis and application in photovoltaic devices William J. Mitchell, Nikos Kopidakis, William L. Rance, Garry Rumbles, David S. Ginley, Sean E. Shaheen | ||
| 254 | Enhancing photovoltaic device performance by optimizing donor and acceptor layer thicknesses in thermally interdiffused P3OT - C60 films Anamika Gopal, R. M. Davis, James R. Heflin | ||
| 255 | Organic redox cascades in dye sensitised solar cells Andrew B. Holmes, David J. Jones, Niels Schulte, Taiho Park, Saif A Haque, James R. Durrant | ||
| 256 | Star shaped molecules for organic photovoltaics Yashpal J Bhandari, Olga Yu Zolotarskaya, David Waller, Zhenggou Zhu, Russell Gaudiana, Mary E Galvin | ||
| 257 | Two-dimensional star shaped oligomer for optoelectronic application Olga Yu Zolotarskaya, Yashpal J Bhandari, David Waller, Zhenggou Zhu, Russell Gaudiana, Mary E Galvin | ||
| Self-Assembly Approaches for Nanopatterning | |||
| 258 | Polymer single crystal mediated gold nanoparticle assembly Bing Li, Christopher Y. Li | ||
| General Papers/New Concepts in Polymeric Materials | |||
| 259 | Characterization of a drug delivery system for the antifungal peptide MUC7 12-mer using time-of-flight secondary ion mass spectrometry (TOF-SIMS) and X-ray photoelectron spectroscopy (XPS) Jennifer A. Appawu, Jinxiang Yu, Joseph A. Gardella, G. Wei, Libuse A. Bobek | ||
| 260 | Actuation behavior of ionic polymer-metal composites with imidazolium-based ionic liquids Jang-Woo Lee, Young-Tai Yoo | ||
| 261 | In-reactor design of polyolefin branch-block copolymers Armenag H. Dekmezian, Eric J. Markel, Weiqing Weng | ||
| 262 | Theoretical study on mechanism of epoxy-amine cure reactions Jan-Eric Ehlers, Nelson G. Rondan, Lam K. Huynh, Thanh N. Truong | ||
| 263 | Application of commercial aliphatic hyperbranched polyesters as processing additives of PVC Yan Li, Changming Wang, Guojian Wang, Jun Qiu | ||
| 264 | Blood compatibility of fluoro-diol-containing polyurethanes Y. H. Lin, N. K. Chou, C. H. Chang, S. S. Wang, S. H. Chu, Kuo-Huang Hsieh | ||
| 265 | Characterization of interfacial property of continuous fiber reinforced PPESK composite Ping Chen, Chun Lu, Qi Yu, Yu Gao, Jianfeng Li | ||
| 266 | Influence of cold plasma treatment on the interfacial adhesion of carbon fiber reinforced PPESK composite Ping Chen, Chun Lu, Qi Yu, Zhenfeng Ding, Yu Gao | ||
| 267 | Study on interfacial properties of high performance carbon fiber/PPESK composites Ping Chen, Qi Yu, Chun Lu, Baichen Wang | ||
| 268 | Development of a microcolumn device for column chromatography on a microfluidics platform Alvaro Gomez | ||
| 269 | Effect of PPESK on the curing of epoxy-cyanate in the molten state Chen Ping Sr., Li Junyan, Ma Zemin, Ma Keming, Wang Bochen | ||
| 270 | Emission dynamics of donor and acceptor substituted PPV for photovoltaic applications Olumide I. Adebolu, Carl E. Bonner Jr., Sam Shajing Sun, Cheng Zhang | ||
| 271 | Green polyolefins Sigridur Jonasdottir, Anne Venturelli, Robert B. Wilson Jr. | ||
| 272 | Preparation of sulfonated block copolyimides for proton conductivity membranes Takanhiko Nagaoka, Shoji Nagaoka, Hiroyoshi Kawakami | ||
| 273 | Reactive extrusion for nylon 6/MWNT composites Han S. Park, Kwang H. Lee | ||
| 274 | RGD functionalized nanopatterned polymer surface for improvement of cell adhesion Hui Sun | ||
| 275 | Surface modification of poly (ethylene terephthalate) by UV-grafting of hydrophilic monomer Hui Sun | ||
| 276 | Chitosan grafted with β-cyclodextrins as adsorbent for salicyclic acid Ying Yi, Fayin Ye, Yuting Wang, Guangxu Zhang, Yongmei Xu, Hua Zheng, Ming Wei | ||
| 277 | Supramolecular approach to hierarchical structures in thin films of block copolymers complexed with liquid crystalline amphiphilic molecules Krystyna Albrecht, Ahmed Mourran, Xiaomin Zhu, Raluca Gearba, Juergen Groll, Tommi Markkula, Uwe Beginn, Wim H. de Jeu, Dimitri A. Ivanov, Martin Moeller | ||
| 278 | Surface modification of UHMWPE fiber reinforced epoxy composite Shih-Pin Lin, Jin-Lin Han, Jen-Taut Yeh, Feng-Chih Chang, Kuo-Huang Hsieh | ||
| 279 | Surface properties of supported dithiocarbamate monolayers Dan Yu, Meredith Chabrier, Kevin Kingsbury, John P. Hagen III | ||
| 280 | Synthesis and characterization of biodegradable, amino acid based poly(ester urethanes) Jie Da, Alan Dominguez, Rosette Angeles, Franzwa Achie, Bibiane De Rosales, Catherine Ochoa, Ryan Knoy, Zaza Gomurashvili, Huashi Zhang | ||
| 281 | Ultra-fine fibers from electrospinning of thermoset epoxy resin Yan Li, Changming Wang, Guojian Wang, Zehua Qu, Jun Qiu, Zhengming Huang | ||
| 282 | Vapor transport studies of highly sulfonated triblock (A-B-A) copolymers Eugene Napadensky, James M. Sloan, Dawn M. Crawford | ||
| 283 | Blending of microbial poly(3-hydroxybutyrate) (PBH) with dendrimers to improve properties Songling Xu, Rongcong Luo, Linping Wu, Kaitian Xu, Guo-Qiang Chen | ||
| 284 | Preparation of polyaniline nanorod by self-assembly process Kyung Wha Oh, Seong Hun Kim, Ji Hyoung Choi | ||
| 285 | Properties of hybrid materials incorporating silica with acrylonitrile-butadiene-styrene copolymers Il-Jin Kim, Jae Bum Park, Ho Joo, O-Sung Kwon | ||
| 286 | Refining RAFT catalyzed polymerization mechanisms with polymer-RAFT end-group analysis by SEC-UV Thomas D. Hahn, John S. Thomaides, Allan Huey, John Morales, Xiaoxia Meng | ||
| 287 | Modification of carbon nanotubes using atom transfer radical polymerization Jin Hwan Choi, Saet Byeol Oh, Jun Ho Chang, Il Kim, Chang-Sik Ha, Bog G. Kim, Jong Hun Han, Sang-Woo Joo, Gue-Hyun Kim, Hyung-Kook Kim, Hyun-Jong Paik | ||
| 288 | Morphology and charaterization of nylon 6 phase in polypropylene/nylon 6/clay composites Jae Hun Shim, Jung Hiuk Joo, Jae Hoon Choi, Jin-San Yoon | ||
| 289 | Neutral amphiphilic homopolymer: Synthesis and characterization Elamprakash N. Savariar, S. Thayumanavan, Sivakumar V. Aathimanikandan | ||
| 290 | Novel multifunctional methacrylate monomers and their photocured composites with reduced post-gel shrinkage Chia-Yin Chen, Chih-Kai Huang, Shih-Pin Lin, Jin-Lin Han, Chun-Pin Lin, Chien-Liang Liu, Kuo-Huang Hsieh | ||
| 291 | Novel silicon elastomers for advanced soft lithography Kyung M. Choi | ||
| 292 | pH-controlled inclusion of dyes within surface hydrogels Irem Erel Unal, Eugenia Kharlampieva, Svetlana A. Sukhishvili | ||
| 293 | Aggregation-induced emission, vapochromism and electroluminescence of tetraphenylethylene and its blends with poly(methyl methacrylate) Jacky Wing Yip Lam, Yongqiang Dong, Jiaxin Sun, Huawei Liu, Zhen Li, Anjun Qin, Jingzhi Sun, Hoi Sing Kwok, Ben Zhong Tang | ||
| 294 | Fabrication and characterization of poly(phenylacetylene)perovskite hybrids Jianli Hua, Jacky Wing Yip Lam, Zhen Li, Hai Peng Xu, Anjun Qin, Ben Zhong Tang | ||
| 295 | Silane functionalization of MWNTs improves the mechanical properties of MWNT/epoxy nanocomposites Pengcheng Ma, Jang-Kyo Kim, Ben Zhong Tang | ||
| 296 | Hygrothermal aging of a pultruded unidirectional carbon fiber reinforced epoxy composite Guijun Xian, Vistasp M Karbhari | ||
| 297 | 3D-cell assembly by layer-by-layer technique Michiya Matsusaki, Yoshio Nakahara, Mitsuru Akashi | ||
| 298 | Paper Withdrawn | ||
| 299 | Allosterically driven multicomponent assembly as a tool to construct supramolecular polymers Alan E. Rowan, Roeland J. M. Nolte, P. J. Thomassen, Nico Veling, J. A. A. W. Elemans | ||
| 300 | Optimization of high solid content St/BA/AA latex preparation process and SAS regression procedure Chenyang Zhao, Dongyue Cao | ||
| 301 | Annealing effect of isotactic polypropylene with high molecular weight on mechanical properties Hideki Oshima, Takafumi Iwata, Satoru Moritomi, Mitsuji Tsuji | ||
| 302 | Design and synthesis of water-stable aliphatic polycarbodiimides that hydrolyze under controlled catalytic conditions Thanasis Karapanayiotis, Stephen C. Moratti, Andrew B. Holmes | ||
| 303 | Anticancer and antiviral activities of organotin polyether amines derived from the antiviral acyclovir Michael R. Roner, Charles E. Carraher Jr., Theodore S. Sabir, Kimberly Shahi, Joanne L. Roehr, Kelly D. Bassett | ||
| 304 | EI (positive and negative) and F MALDI MS of organotin poly(ester amines) derived from ciprofloxacin Anna Zhao, Charles E. Carraher Jr. | ||
| 305 | Rearrangement of organotin enrofloxacin compound in the processing of ESI mass spectroscopy Anna Zhao, Charles E. Carraher Jr. | ||
| 306 | Synthesis of organotin polyethers from diols containing varying methylene separators Girish Barot, Charles E. Carraher Jr. | ||
| 307 | Survey of anomalous fiber formation for selected organotin polymers Girish Barot, Charles E. Carraher Jr. | ||
| 308 | Electrical conductivity of selected organotin fluorescein polydyes Amitabh J. Battin, Charles E. Carraher Jr. | ||
| 309 | F MALDI TOF MS of group IVA polymers containing acyclovir Theodore S. Sabir, Charles E. Carraher Jr. | ||
| 310 | Organoantimony polymers containing acyclovir Theodore S. Sabir, Charles E. Carraher Jr. | ||
| 311 | Bismuth-containing polymers containing acyclovir Theodore S. Sabir, Charles E. Carraher Jr. | ||
| 312 | Synthesis and biological activity of organotin polyesters from 1,1'-ferrocenedicarboxylic acid Deborah Siegmann-Louda, Charles E. Carraher Jr., Shawn Iverson, Kenzo Morie | ||
| 313 | Synthesis of organotin polyethers containing diethylstilbestrol Charles E. Carraher Jr., Yuki Ashida, Girish Barot | ||
| 314 | Synthesis of titanocene, zirconocene and hafnocene polyethers from diethylstilbestrol Charles E. Carraher Jr., Yuki Ashida | ||
| 315 | Antimicrobial wool protein fibers with incorporation of aminopyridinium salts Tao Zhao, Gang Sun | ||
| 316 | Synthesis, characterization and antimicrobial activities on wool protein fibers of aminopyridinium salts Tao Zhao, Gang Sun | ||
| 317 | Application of in situ modified rubber in short fiber reinforced rubber composites Hongtao Liu, Xiaohong Liu | ||
| 318 | Aqueous media electrospinning of wheat gluten fibers Jing Dong, Rebecca Dicharry, Richard S. Parnas, Alexandru D. Asandei | ||
| 319 | Cp2TiCl-catalyzed grafting of methyl methacrylate from partially epoxidized poly(isoprene) Alexandru D. Asandei, Gobinda Saha, Alpana Ranade | ||
| 320 | Effect of aldehyde structure in the Cp2TiCl-catalyzed styrene living radical polymerization initiated by carbonyl SET reduction Alexandru D. Asandei, Yanhui Chen | ||
| 321 | Graft copolymerization of methyl methacrylate from poly(glycidyl methacrylate-co-styrene) initiated by Cp2TiCl-catalyzed epoxide radical ring opening Alexandru D. Asandei, Gobinda Saha | ||
| 322 | Automatic online monitoring of copper mediated living radical polymerizations John A. McConville, Greg Saunders, Ian Willoughby, Stephen O'Donohue | ||
| 323 | Multi detector gel permeation chromatography via adaptable instrumentation Greg Saunders, Stephen O'Donohue, John A. McConville, Ian Willoughby, Adrian G Williams | ||
| 324 | Studies of free radical emulsion polymerization reactions via automatic continuous on-line process monitoring Ian Willoughby, Greg Saunders, Stephen O'Donohue, John McConville | ||
| 325 | On-line monitoring of key copolymerization reaction parameters Greg Saunders, Ian Willoughby, Stephen O'Donohue, John A. McConville, Wayne F. Reed | ||
| 326 | Bio-inspired polymer dental composites with ordered filler arrangement Quan Wan, George Baran, Sunil Kulkarni, Solomon Praveen | ||
| 327 | Biostable poly(carbonate urethanes) networks with shape-memory Yakai Feng Sr. | ||
| 328 | Degradation behaviors of polyesterurethane network in oxidative environments Yakai Feng Sr. | ||
| 329 | Block copolymer nanoring template Vera Bocharova, Anton Kiriy, M. Stamm, Alla Synytska | ||
| 330 | Polymer-modified multiwalled carbon nanotubes for ultrathin transparent conductive coatings Vera Bocharova, Anton Kiriy, Oertel Ulrich, M. Stamm, Christophe Detrembleur, Robert Jérôme | ||
| 331 | Grafting of conductive polymers from poly(glycidyl methacrylate)-based macromolecular anchoring layer Nataliya Khanduyeva, Vera Bocharova, Anton Kiriy, M. Stamm, Ulrich Oertel | ||
| 332 | Molecular weight determination by visualization of stretched polycation molecules Vera Bocharova, Anton Kiriy, M. Stamm, Christophe Detrembleur, Robert Jérôme | ||
| 333 | Blowing polymer bubbles on surfaces Wei Zhuang, Nikolai Severin, Igor M. Sokolov, Jürgen P. Rabe | ||
| 334 | Carbon nanotube-conductive polymer composite electrode for transparent polymer light emitting device application Ting Zhang, Amanda S. Simens, Andrew Minor, Gao Liu | ||
| 335 | Characteristics of novel dental composites containing 2,2 bis[4-(2-methoxy-3-methacryloyloxy propoxy) phenyl] propane as a base resin Mun Suk Kang, Sun Hwa Yoo, Chang Keun Kim | ||
| 336 | Complexation of water soluble conjugated polymer with cationic surfactants Chae Kyu Kim, Chulhee Kim | ||
| 337 | Covalently tailoring the surface properties of a self-assembling protein scaffold for materials applications Patrick G. Holder, Ernest W. Kovacs, Matthew B. Francis | ||
| 338 | Crosslinked-sulfonated polyimide-inorganic oxide nanocomposite membranes Chang Hyun Lee, Shin Young Hwang, So Young Lee, Young Moo Lee | ||
| 339 | Crystallization effect on microphase-separated nanostructures of PS-PLLA Yeo-Wan Chiang, Rong-Ming Ho, Chu-Chieh Lin, Bor Han Huang | ||
| 340 | Decolorization of colored poly(ethylene terephthalate) bottle flakes using hydrogen peroxide Mohit Gupta, Suneel A. Bandi, Sanjay Mehta, David A. Schiraldi | ||
| 341 | Development of soy protein and polylactide blends: Processing, toughening, morphology, and properties Jinwen Zhang, Long Jiang | ||
| 342 | Effect of crystallinity on the foam morphology of poly (L-lactic acid) Xia Liao, Arghavan Victoria Nawaby, Michael Day | ||
| 343 | Effect of partial oxidation on gas separation performance of carbon-silica membrane derived from poly(imide siloxane) Sang Hoon Han, Chul Ho Jung, Ho Bum Park, Young Moo Lee | ||
| 344 | High performance polymer membrane rendered by thermal conversion process Chul Ho Jung, Ho Bum Park, Anita J. Hill, Benny D. Freeman, Young Moo Lee | ||
| 345 | Effect of photocure treatment on surface properties of nylon fibre Yan Zhu, Yu Chen, Lian-Meng Zhang, Hua Zheng | ||
| 346 | Effect of solvent on properties of randomly sulfonated polystyrene ionomer films cast onto silica surfaces Xiaowen Zhai, R. A. Weiss | ||
| 347 | Effect of the irregular contour of pores on nanostructures of diblock copolymers confined in anodized aluminum oxide templates Seung-Min Jeon, Jin-Kyu Lee, Kookheon Char, Byeong-Hyeok Sohn | ||
| 348 | Effect of various length EO side chain of gel polymer electrolyte based on poly (ethylene glycol) methyl ether methacrylate Fu Ming Wang, Jyh Tsung Lee, Chang Rung Yang, Jing Pin Pan | ||
| 349 | Effects of PEG600 and Tween80 on performances and gelation kinetics of PPEK hollow fiber membranes Yanbin Yun, Yunhua Tian, Runyu Ma, Cuixian Chen | ||
| 350 | Efficient fabrication of crack-free colloidal crystal films with tunable thickness Sue-Min Chang, Han-Yun Cheng, I-ling Kao, Ruey-an Doong | ||
| 351 | Electromigration characteristics of charge controllable electrophoretic particles in a low dielectric medium Ho Chun Kang, Sung Jin Kim, In-Joo Chin | ||
| 352 | Enhanced diffusion through manipulation of stereochemistry in polypropylene by dynamical Monte Carlo Numan Waheed, Wayne L. Mattice | ||
| 353 | Fibers based on alginate/konjac glucomannan blend Lihong Fan | ||
| 354 | Fibronectin-coated nano-precipitates of calcium-magnesium phosphate for integrin-targeted gene delivery Ezharul Hoque Chowdhury, Akaike Toshihiro | ||
| 355 | Fluorescent organometallic sensors for the detection of chemical warfare agent mimics Mark Burnworth, Daniel Knapton, Stuart J. Rowan, Christoph Weder | ||
| 356 | Functionalized liquid precursors for new fluorinated elastomers Jennifer Y. Kelly, Joseph M. DeSimone | ||
| 357 | Gene transfection with a novel amidine-bearing cationic lipid Shota Kusuki, Kazunori Koiwai, Yasuya Kudo, Yoichi Takeda, Naohiko Shimada, Kazuo Sakurai | ||
| 358 | Highly sensitive photoimaging materials based on nonlinear organic reactions of base-amplifying silicone resins Koji Arimitsu, Hiroshi Kobayashi, Satoru Inoue, Takahiro Gunji, Yoshimoto Abe, Kunihiro Ichimura | ||
| 359 | Holographically patterned, low molecular weight block copolymer Bragg reflectors Michael Birnkrant, Hilary McWilliams, Christopher Li, Lalgudi V. Natarajan, Vincent P. Tondiglia, Richard L. Sutherland, Timothy J. Bunning | ||
| 360 | Improved load transfer in nanotube/polymer composites with increased polymer molecular weight Minfang Mu, Karen I. Winey | ||
| 361 | Improvement of the intrinsic viscosity of degradation poly(ethylene terephthalate) by micro-gels pathway Hongyuan Cheng, Liqun Zhang | ||
| 362 | In-process analysis for melt-drawing behavior of polytetrafluoroethylene using synchrotron X-ray measurements and resultant property development Takashi Morioka, Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto, Syozo Murakami, Hiroki Uehara | ||
| 363 | Investigation of dispersion states of soy protein isolates in the DMSO/urea Ru Xiao, Duan Yin, Wei Fan, Lixia Gu, Gang Sun | ||
| 364 | Production of functionalized fibers through reactive extrusion Mohammad R Badrossamay, Gang Sun | ||
| 365 | Investigation of supported lipid layers on OTS modified spherical silica surfaces Jiangyue Zhang, Stephanie L. Wunder | ||
| 366 | L-lysine diisocyanate based biodegradable thermoplastic polyurethanes with broad range of mechanical properties Mohammad K. Hassan, Jeffrey S. Wiggins, Kenneth A. Mauritz, Robson F. Storey | ||
| 367 | Polymer clay aerogel composites Matthew D. Gawryla, Suneel A. Bandi, David A. Schiraldi | ||
| 368 | Electrical and mechanical properties of carbon black reinforced polypropylene Zuhal Küçükyavuz, Yasin Kanbur | ||
| 369 | Mechanical properties of silica colloidal crystals/methacrylate nanocomposites Sunil Kulkarni, Rahul Ranade, Rajesh Madathingal, Stephanie L. Wunder | ||
| 370 | Mechanical property and molecular weight distribution change of low density polyethylene caused by gamma ray and electron beam irradiation Katsuhisa Tokumitsu, Akira Tanaka, Eiichi Miyagawa, Mitsunobu Kitamura | ||
| 371 | Mechanism of glycofection: Enhanced nuclear import of plasmid DNA complex with disaccharide-conjugated poly(ethylenimine)s Takeshi Nagasaki, Toshiki Shiga, Tomomi Jinta, Seiji Shinkai | ||
| 372 | Modulation of protein function using an amphiphlic polymer Britto S. Sandanaraj, S. Thayumanavan | ||
| 373 | Molecular weight segregation on surfaces of polyethylene blend films as estimated from SPM nano scratch behaviors Jun-ichi Suwa, Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto, Hiroki Uehara | ||
| 374 | Morphological behavior of ABCBA pentablock copolymers Adam J. Meuler, Marc A. Hillmyer, Frank S. Bates | ||
| 375 | Morphology of novel in situ microfibrillar and lamellar hybrid blends of cellulose acetate butyrate (CAB)/polyolefin Dong Wang, Gang Sun | ||
| 376 | Multifunctional initiators provide recognition sites at the block junction of block copolymers Fredrik Nederberg, Bas G. G. Lohmeijer, Russell C. Pratt, Andrew F. Mason, Gillian F. Eade, Jeongsoo Choi, Nitash P. Balsara, Robert M. Waymouth, James L. Hedrick | ||
| 377 | Multilayer thin films for fuel cell application: Conductivity and gas permeability J. Nathan Ashcraft, Paula T. Hammond | ||
| 378 | Nanostructured conducting polymer supercapacitors Xinyu Zhang, Von H. Ebron, John P. Ferraris, Alan G. MacDiarmid, Sanjeev K. Manohar | ||
| 379 | Nanostructures in Langmuir monolayer and Langmuir-Blodgett films of amphiphilic tri block copolymers with water soluble middle block Peetla Chiranjeevi, Karsten Busse, Jörg Kressler | ||
| 380 | Nanotack properties of polystyrene-block-polybutadiene-block-polystyrene and polystyrene-block-polyisoprene-block-polystyrene/C60 fullerene light-responsive adhesive nanocomposites J. Paige Phillips, Ryan R. Stephen, Erin L. Fortenberry, Rahul Misra, Sarah E. Morgan | ||
| 381 | New routes to increase surface coverage in particle lithography Maricel Marquez, Krupa Patel, Warren Yates, David Schmidtke, Brian P. Grady | ||
| 382 | Nitric oxide-releasing silica nanoparticles: Synthesis, characterization, and efficacy against ovarian cancer cells Jae Ho Shin, Ellen V. Stevens, Channing Der, Mark H. Schoenfisch | ||
| 383 | Novel approach to organic core-shell nanoobjects with tunable morphologies Zhi-Hang Tang, Bao-An Yang | ||
| 384 | Vesicle assemblies of PS-b-P4VP/HCOOH in their common organic solvent Zhi-Hang Tang, Bao-An Yang | ||
| 385 | Novel dielectric behavior of nanocomposite of passivated carbon nanotube Sang-Soo Lee, Hye-Jin Park, Junkyung Kim | ||
| 386 | Novel miscible polycarbonate/copolyester blends having optical-grade clarity and their upper critical solution temperature type phase behavior Lyang Uk Kim, Jonghwi Lee, Chang Keun Kim | ||
| 387 | Novel modified polymeric fabric/fiber as solid supports for peptide synthesis and biological assay Bei Xiang, Gang Sun, Kit S. Lam | ||
| 388 | Oligourethanes containing mixed-metal clusters in the main-chain: Synthesis and optical limiting properties Marie P. Cifuentes, Mark G. Humphrey, Nigel T. Lucas, Michael D. Randles, Marek Samoc | ||
| 389 | Organoboron block copolymers via ATRP followed by post-polymerization modification Chengzhong Cui, Jatinder S. Banipal, Yang Qin, Frieder Jäkle | ||
| 390 | PEGylation of UHMWPE to reduce mechanical adhesion Sheryl R. Kane, Lisa A. Pruitt | ||
| 391 | Performance of cement mortars modified by emulsifier-free latex Qiwei Pan, Yue Wu, Jin Zhang, Lijuan Liu, Meishan Pei | ||
| 392 | Synthesis and properties of copolymer of N-alkylcarboxyl-substituted maleamic acids and hydrophobic monomers Junjie Dong, Yongqing Yang, Qiwei Pan, Jin Zhang, Meishan Pei | ||
| 393 | Physical and morphological studies on blend of surface grafted starch/PLA Ruyi Zhou, Chong Lu, Yongfeng Li, Shujun Cheng | ||
| 394 | Plasma-based surface modification and adhesion enhancement of polyester monofilaments Gang Bai, Yanchun Liu | ||
| 395 | Wettability and aging of plasma-treated acrylic fibers Yanchun Liu, Gang Bai, Danian Lu | ||
| 396 | Polymer chain dynamics and melting behavior in a carbon nanofiber reinforced elastomeric composite Antonis Kelarakis, Kyunghwan Yoon, Rajesh H Somani, Igors Sics, Benjamin S. Hsiao, Benjamin Chu | ||
| 397 | Polymer self-rolled microtubes doped by zinc oxide nanoparticles V. Luchnikov, T. Buesgen, L. Ionov, S. Diez, M. Giersig, Manfred Stamm | ||
| 398 | Microsyringes and microfluidic channels made of self-rolled polymer bilayers V. Luchnikov, M Goncalves, O. Kobylinska, M. Mottakin, V. Senkovsky, Manfred Stamm | ||
| 399 | Stabilization of PS-b-P4VP diblock copolymer nanotemplates by UV irradiation Y. Sun, V. Luchnikov, M. Stamm | ||
| 400 | In situ investigation of the grafting reaction and the temperature sensitive swelling of PNIPAAM brushes using ATR-FTIR Sina Kraft, Martin Mueller, Petra Uhlmann, Manfred Stamm | ||
| 401 | Polypropylene/layered silicate nanocomposites compatibilized with polypropylene-graft-isocyanate Jin W. Bae, Jae Y. Jho | ||
| 402 | Pore size enlargement effect of ethanol on PES membrane Yin Lu, Lin Zhang | ||
| 403 | Preparation and characterization of dialdehyde starch-crosslinked carboxymethyl chitosan/gelatin hydrogel Hua Zheng, Huiyu Qin | ||
| 404 | Preparation and characterization of poly(4-aminobenzoic acid) grafted MWNT Yeon Wook Jang, In-Joo Chin | ||
| 405 | Preparation and characterization of poly(L-lactic acid)-graft-multiwalled carbon nanotubes Hun Sik Kim, Byung Hyun Park, GuangXin Chen, Jin San Yoon | ||
| 406 | Preparation and properties of biodegradable polyaspartamides with cationic pendants and the related crosslinked hydrogels Ji-Heung Kim, Jong Rok Moon, Bong Sup Kim | ||
| 407 | Preparation of flexible-rigid-flexible tri-segment polyurethane and its phase separation Qingli Du, Zhongjie Du, Chen Zhang, Hangquan Li | ||
| 408 | Preparation of resin black matrix (RBM) and their properties study Kuo-Huai Kuo, Wen-Yen Chiu, Kuo-Huang Hsieh, Wen-Ren Chen, Shih-Hao Chen | ||
| 409 | Properties of surface modified multiwalled carbon nanotube-filled PET composite film Sanghyun Jin, Kwan Han Yoon | ||
| 410 | Reduced escherichia coli and staphylococcus aureus adhesion via xerogel-derived nitric oxide release Gregory W. Charville, Mark H. Schoenfisch | ||
| 411 | Reductant-responsive biodegradable hydrogel for 3D artificial tissue Hiroaki Yoshida, Michiya Matsusaki, Mitsuru Akashi | ||
| 412 | Selective heterogeneous hydrogenation by recyclable poly(allylamine)-supported palladium(0) nanoparticle catalyst Yiying Hong, Ayusman Sen | ||
| 413 | Self-assembly characteristics of amide dendrons and their dendronized polymers Chiyoung Park, Jino Lim, Moon Sup Im, Chulhee Kim | ||
| 414 | Organic nanotubes derived from dendrons with cyclodextrin-inclusion complex and their supramolecular transformation Chiyoung Park, Moon Sup Im, Jino Lim, Chulhee Kim | ||
| 415 | Self-assembly of homopolymer/small organic building molecules in the common solvent Huisheng Peng | ||
| 416 | Self-stratification of poly-(methyl methacrylate/n-butyl acrylate) colloidal dispersions containing PVOH: A spectroscopic study Kevin L. Rhudy, S. Su, Hunter S. Howell, Marek W. Urban | ||
| 417 | Simple route to fabricate 2D and 3D photonic crystals and its inverse structure Chih-Kai Huang, Chia-Hua Chan, Kuo-Huang Hsieh, Chia-Yin Chen, Shih-Pin Lin, Yen-Ling Tsai | ||
| 418 | Spacer length controlled oblique-columnar to lamello-columnar mesophase transition in liquid crystalline DNA-discotic cationic lipid complexes Li Cui, Jianjun Miao, Lei Zhu | ||
| 419 | Studies on flame retardancy of cotton fabrics: Effect of nitrogen additives Sabyasachi Gaan, Gang Sun | ||
| 420 | Study of curing in epoxy resin-based nanocomposites Kun Tao, Bachlien Dang, Xin Wei | ||
| 421 | Study of the adsorption of a cationic surfactant on photoresist surfaces Astrid Drechsler, Cornelia Bellmann, Alla Synytska, Nicole Petong, Karina Grundke, Manfred Stamm, Odo Wunnicke | ||
| 422 | Study of the biocompatibility of different alginates after the implantation of alginate-poly-L-lysine-alginate in Balb/c mice Sara Ponce, Gorka Orive, Rosa Hernández, Alicia R. Gascón, Josep M. Canals, Jordi Alberch, Jose Luis Pedraz | ||
| 423 | Study on the ordered structures of poly(styrene-b-vinyl4pyridine) in a solution state by using small angle X-ray scattering and the GIFT Soo-Young Park, Yun-Jeong Chang, Woo-Whan Seol | ||
| 424 | Synthesis and characteristics of aromatic poly (thio-ethers): A high temperature sealant for severe environments Matthew Yonkey, Christopher A. Crouse, Dillip K. Mohanty | ||
| 425 | Synthesis and characterization of dihexyl derivatives of dithieno[3,2-b:2',3'-d]thiophene for field-effect transistors Michael A. Armitage, Joseph Frey, Stephen C. Moratti, Martin Heeney, Iain McCulloch, Andrew B. Holmes | ||
| 426 | Synthesis and characterization of polyethylene-b-poly(ethylene oxide)-b-polyhedral oligomeric silsesquioxane (POSS) triblock copolymers Jianjun Miao, Li Cui, Lei Zhu | ||
| 427 | Synthesis and characterization of proton conducting sulfonated poly(phthalazinone ether nitrile ketone) bearing pendent cyano groups Guoqing Wang, Xiuling Zhu, Yongfang Liang, Shouhai Zhang, Xigao Jian | ||
| 428 | Synthesis and characterization of UV curable siliconized polyurethane acrylate coating prepolymer with multi-vinyl functional groups Chengwen Li, Zhongjie Du, Chen Zhang, Hangquan Li | ||
| 429 | Synthesis and electrochromic properties of poly(p-phenylene vinylene) Zuhal Küçükyavuz, Savas Küçükyavuz, Tugba Öztürk | ||
| 430 | Synthesis and superstructures of novel linear and linear-hyperbranched amphiphilic block copolymers Francisco-J. Lopez-Villanueva, Emilie Barriau, Tobias W. Schleuss, Rüdiger Berger, Andreas F. M. Kilbinger, Holger Frey | ||
| 431 | Synthesis of antimicrobial colorants for polymeric materials Junshu Liu, Gang Sun | ||
| 432 | Synthesis of highly conductive self-doping poly(EDOT-co-TEBS) copolymers Jui-Hung Chen, Chi-An Dai, Wen-Yen Chiu | ||
| 433 | Synthesis of oligo(p-benzamide)-b-poly(ethylene glycol) rod-coil block copolymers on solid support Hannah M König, Andreas F. M. Kilbinger | ||
| 434 | Synthesis of polystyrene/silica composite microspheres by soap-free emulsion polymerization Jeongwoo Lee, Sang Eun Shim | ||
| 435 | Tailor-made poly(amidoamines) for biomedical application Laura Hartmann, Stefanie Haefele, Markus Antonietti, Hans G. Börner | ||
| 436 | Templated synthesis and properties study of Nylon-DNA Yu Liu, Liang Ding, Roujie Sha, James, W. Canary, Nadrian C. Seeman | ||
| 437 | Thermal and mechanical analysis of covalently linked silica/isotactic polypropylene nanocomposite Shikchya Tandukar, Georgios Polyzos, Evangelos Manias, Ayusman Sen | ||
| 438 | Thermally reversible Diels-Alder (DA) crosslinked polymers: Functionalized polystyrene (PS) spheres Stephen M. Budy, Dennis W. Smith Jr. | ||
| 439 | Towards functionalized carbon nanotubes, using nano hybrid shish kebabs Bing Li, Lingyu Li, Molly A. Stewart, Christopher Li | ||
| 440 | Trilayer crystalline lamellar morphology under confinement Tsai-Ming Chung, Rong-Ming Ho, Jing Chung Kuo, Jing-Cherng Tsai, Benjamin S. Hsiao, Igors Sics | ||
| 441 | Tuning the water wetting of fabrics using nanoparticle multilayer assembly Zhi Li, Daeyeon Lee, Lei Zhai, Michael F. Rubner, Robert E. Cohen | ||
| 442 | Viscoelastic behavior of fullerene end-capped linear polymers Xiaorong Wang, Yuan-Yong Yan | ||
| 443 | Water-disintegrative green plastics: Synthesis of PEC-PEG multi-block copolymer Tsuneyuki Ohkubo, Akito Watanabe, Rieko F. Ohtani, Osamu Matsuoka, Atsuo Kobata | ||
| 444 | Water-disintegrative green plastics: Biodegradable dynamic polymer Tadahito Nobori, Manabu Shimoda, Makoto Sukegawa | ||
| 445 | Water-disintegrative green plastics: Biodegradable polymers of accelerated hydrolysis rate Ayako Kadosaka, Makoto Sukegawa, Hosei Shinoda | ||
| 446 | Well defined nano structures by self assembly of oligo-(p-benzamide) based rod-coil copolymers from dilute solution Tobias W. Schleuss, Rüdiger Berger, Andreas F. M. Kilbinger | ||
| 102 | Synthesis of well-defined thermosensitive diblock copolymers with pendant methoxytris(oxyethylene) groups and temperature-induced micellization in dilute aqueous solutions Fengjun Hua, Xueguang Jiang, Bin Zhao | ||
Symposium Grid -- Division of Polymeric Materials: Science & Engineering -- Session Listing
The 232nd ACS National Meeting, San Francisco, CA, September 10-14, 2006